Dell SonicWALL Directory Services Connector 3.7
Administration Guide
27
Configuring SSO Agent settings on Actions > Properties
The Actions > Properties page provides a number of configuration settings for the SSO Agent.
Figure 2. Actions > Properties page
To configure the SSO Agent settings:
1 In the DSC Configuration Tool, select SonicWALL SSO Agent in the left pane and then navigate to the
Actions > Properties page.
2 For Host IP, type in the IP address of the machine with the SSO Agent installed.
3 For Logging Level, select one of the following from the drop-down list:
• 0 - No logging
• 1 - Errors will be logged
• 2 - Debug messages and errors will be logged
• 3 - Diagnostic messages, debug messages, and errors will be logged
4 For Cache Refresh Time, enter the number of seconds that items should remain in the SSO Agent cache.
The default is 60 seconds, the range is 30-600 seconds. For more information, see
About the SSO Agent
cache
on page
8
and
Using the SSO Agent cache
on page
36
.
5 For Max Thread Count, enter the maximum number of threads that the SSO Agent can use at one time.
The default is 300, the range is 50-999.
6 For Query Source, select the desired method for the SSO Agent to identify the user. Select one of the
following from the drop-down list:
• NETAPI - Use NETAPI to identify the user (default)
• WMI - Use WMI to identify the user
