2
M i c r o pr o c e s s o r M o d ul e
w
w
w
.dell.com |
su
pport.de
ll.com
FILE LOCATION:
C:\webworks\projects\tangedoc\source\cpu.fm
DELL CONFIDENTIAL – PRELIMINARY 3/11/02
Removing the Microprocessor Module
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed battery.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE:
Read "Preparing to Work Inside the Computer" before performing
the following procedure.
NOTICE:
Do not touch the processor die. Press and hold the microprocessor
down on the substrate on which the die is mounted while turning the cam screw
to prevent intermittent contact between the cam screw and microprocessor.
NOTICE:
To avoid damage to the microprocessor, hold the screwdriver so that
it is perpendicular to the microprocessor when turning the cam screw.
5
2
4
1
3
tangdoc0.book Page 2 Monday, March 11, 2002 5:33 PM