2
M e m o r y M o d ul e , M o d e m , a nd Op t i c al D r i v e
w
w
w
.dell.com |
su
pport.de
ll.com
FILE LOCATION:
C:\webworks\projects\tangedoc\source\upgrades.fm
DELL CONFIDENTIAL – PRELIMINARY 3/11/02
Memory Module
Removing the Memory Module/Modem Cover
HINT:
This procedure
covers removing and
replacing the memory
module located under the
memory module/modem
cover on the bottom of the
computer. A second
memory module resides
on the upper surface of
the system board under
the EMI shield. To replace
the memory module under
the EMI shield, perform
the procedure for
removing the EMI shield.
Then replace the memory
module.
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed battery.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE:
Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1
Turn the computer over, and remove the memory module/modem
cover:
a
Remove the M2.5 x 5-mm screw from the memory
module/modem cover.
b
Slide the cover out approximately 10 mm, and lift it away from the
computer.
NOTICE:
To prevent damage to the memory module connector, do not use
tools to spread the inner metal tabs that secure the memory module.
1
M2.5 x 5-mm screw
2
memory module/modem cover
2
1
tangdoc0.book Page 2 Monday, March 11, 2002 5:33 PM
