Dell SMA 200 Administration Manual Download Page 384

Page: 384 / 514

Dell SonicWALL Secure Mobile Access 8.5

Administration Guide

384

• Global Policies

- Contains access policies for all nodes in the organization.

• LocalDomain

- The LocalDomain group is automatically created to correspond to the default

LocalDomain authentication domain. This is the default group to which local users are added, unless
otherwise specified.

To create a new group:

1 Click

Add Group

. The

Add Local Group

window is displayed.

2 In the

Add Local Group

window, enter a descriptive name for the group in the

Group Name

field.

3 Select the appropriate domain from the

Domain

drop-down list. The domain is mapped to the group.

4 Click

Accept

to update the configuration. After the group has been added, the new group is added to

the

Local Groups

window.

All of the configured groups are displayed in the

Users > Local Groups

page, listed in alphabetical order.

Editing Group Settings

To edit the settings for a group, click the configure icon

in the row for the group that you wish to edit in the

Local Groups table on the

Users > Local Groups

page. The Edit Group Settings window contains six tabs:

General

Portal

NxSettings

NxRoutes

Policies

, and

Bookmarks

See the following sections for information about configuring settings:

•

Editing General Group Settings

on page

384

•

Modifying Group Portal Settings

on page

385

•

Enabling Group NetExtender Settings

on page

387

•

Enabling NetExtender Routes for Groups

on page

388

•

Adding Group Policies

on page

390

•

Editing a Policy for a File Share

on page

391

•

Configuring Group Bookmarks

on page

392

Editing General Group Settings

The

General

tab provides configuration options for a group’s inactivity timeout value and single sign-on

settings.

To modify the general user settings:

1 In the left column, navigate to the

Users

Local Groups

2 Click the configure icon next to the group you want to configure. The

General

tab of the

Edit Group

Settings

window displays. The

General

tab displays the following non-configurable fields:

Group Name

and

Domain Name

Summary of Contents for SMA 200



































































































































































































































































































































































































































































































































Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands

Dell SMA 200, Administration Manual

Search results

Summary of Contents for SMA 200

Reviews:

Related manuals for SMA 200

Brands by name

Popular brands