Dell SonicWALL Secure Mobile Access 8.5
Administration Guide
391
• IP Address
- If your policy applies to a specific host, enter the IP address of the local host
machine in the
IP Address
field. Optionally enter a port range (80-443) or a single port number
into the
Port Range/Port Number
field.
• IP Address Range
- If your policy applies to a range of addresses, enter the beginning IP address
in the
IP Network Address
field and the subnet mask that defines the IP address range in the
Subnet Mask
field. Optionally enter a port range (4100-4200) or a single port number into the
Port Range/Port Number
field.
• Network Object -
If your policy applies to a predefined network object, select the name of the
object from the
Network Object
drop-down list. A port or port range can be specified when
defining a Network Object. See
.
• Server Path
- If your policy applies to a server path, select one of the following radio buttons in
the R
esource
field:
•
Share (Server path) - When you select this option, type the path into the Server Path field.
•
Network (Domain list)
•
Servers (Computer list)
See
Editing a Policy for a File Share
.
• URL Object
- If your policy applies to a predefined URL object, type the URL into the
URL
field.
• IPv6 Address
- If your policy applies to a specific host, enter the IPv6 address of the local host
machine in the
IPv6 Address
field. Optionally enter a port range (for example, 4100-4200) or a
single port number into the
Port Range/Port Number
field.
• IPv6 Address Range
- If your policy applies to a range of addresses, enter the beginning IPv6
address in the
IPv6 Network Address
field and the prefix that defines the IPv6 address range in
the
IPv6 Prefix
field. Optionally enter a port range (for example, 4100-4200) or a single port
number into the
Port Range/Port Number
field.
• All IPv6 Address
- If your policy applies to all IPv6 addresses, you do not need to enter any IP
address information.
7 Select the service type in the
Service
menu. If you are applying a policy to a network object, the service
type is defined in the network object.
8 Select
Allow
or
Deny
from the
Status
drop-down list to either permit or deny SMA/SRA connections for
the specified service and host machine.
9 Click
Accept
to update the configuration. After the configuration has been updated, the new group
policy is displayed in the
Edit Local Group
window. The group policies are displayed in the Group
Policies list in the order of priority, from the highest priority policy to the lowest priority policy.
Editing a Policy for a File Share
To edit file share access policies:
1 Navigate to
Users > Local Groups
.
2 Click the configure icon next to the group you want to configure.
3 Select the
Policies
tab.
4 Click
Add Policy...
