Troubleshooting
|
63
The display will go into Standby mode in 4 minutes.
www.dell.com/SE2422HM
Dell 24 Monitor
SE2422HM
No DVI Cable
NOTE:
This box also appears during normal system operation if the video cable is
disconnected or damaged.
4. Turn off your monitor and reconnect the video cable; then turn on both your
computer and the monitor.
If your monitor screen remains blank after performing the previous step, check your
video controller and computer for any possible issues.
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if the screen
abnormality you are experiencing is an inherent problem with your monitor, or with your
computer and video card.
The description of buttons see
Using the front panel controls
.
1
2 3 4
5
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the
screen).
2. Press and hold Built-in diagnostics
button
(
button 4
) for four seconds and a
menu appears on the screen.
