(Four port HBA only) IPv4 address for storage controller module 1: port 3
___ . ___ . ___ . ___
(Four port HBA only) IPv4 address for storage controller module 2: port 3
___ . ___ . ___ . ___
Table 10. iSCSI Fault Domain 2
Target IPv4 address
___ . ___ . ___ . ___
Subnet mask
___ . ___ . ___ . ___
Gateway IPv4 address
___ . ___ . ___ . ___
IPv4 address for storage controller module 1: port 2
___ . ___ . ___ . ___
IPv4 address for storage controller module 2: port 2
___ . ___ . ___ . ___
(4-port HBA only) IPv4 address for storage controller module 1: port 4
___ . ___ . ___ . ___
(4-port HBA only) IPv4 address for storage controller module 2: port 4
___ . ___ . ___ . ___
Additional Storage Center Information
The Network Time Protocol (NTP) and Simple Mail Transfer Protocol (SMTP) server information is optional. The proxy server information is
also optional, but it may be required to complete the
Discover and Configure Uninitialized Storage Centers
wizard.
Table 11. NTP, SMTP, and Proxy Servers
NTP server IPv4 address
___ . ___ . ___ . ___
SMTP server IPv4 address
___ . ___ . ___ . ___
Backup SMTP server IPv4 address
___ . ___ . ___ . ___
SMTP server login ID
________________
SMTP server password
________________
Proxy server IPv4 address
___ . ___ . ___ . ___
Fibre Channel Zoning Information
For a storage system with Fibre Channel front-end ports, record the physical and virtual WWNs of the Fibre Channel ports in Fault Domain
1 and Fault Domain 2. This information is displayed on the
Review Front-End
page of the
Discover and Configure Uninitialized Storage
Centers
wizard. Use this information to configure zoning on each Fibre Channel switch.
Table 12. Physical WWNs in Fault Domain 1
Physical WWN of storage controller 1: port 1
________________
Physical WWN of storage controller 2: port 1
________________
(4-port HBA only) Physical WWN of storage controller 1: port 3
________________
(4-port HBA only) Physical WWN of storage controller 2: port 3
________________
100
Worksheet to Record System Information
