Dell SCv300 Page 19 Owner'S Manual Download

Page: 19 / 20

SCv300 and SCv320 Expansion Enclosure

Technical Specifications

The technical specifications of the SCv300 and SCv320 expansion enclosures are displayed in the following tables.

Drives

SAS hard drives

SCv300

: Up to 12 hot-swappable 3.5-inch 12 Gbps SAS hard drives or SAS solid state drives

(SSDs)

SCv320

: Up to 24 hot-swappable 2.5-inch 12 Gbps SAS hard drives or SAS solid state drives

(SSDs)

NOTE: SCv300 and SCv320 expansion enclosures support self-encrypting drives
(SEDs).

Enclosure Management Modules (EMMs)

EMMs

Two hot-swappable IO modules

Redundant Array of Independent Disks (RAID)

Controller

Two hot-swappable storage controllers

Management

RAID management using Dell Storage Manager

Back-Panel Connectors (per EMM)

SAS connectors

Four mini-SAS HD connectors for connecting an expansion enclosure to a storage system.

NOTE: SAS connectors are SFF-8086/SFF-8088 compliant.

LED Indicators

Front panel

•

One two-color LED indicator for system status

•

One single-color LED indicator for power status

Hard-drive carrier

•

One single-color activity LED

•

One two-color LED status indicator per drive

Power supply/cooling fan

Three LED status indicators for power supply status, power supply module status, and AC status

Power Supplies

AC power supply (per power supply)

Wattage

600 W

Voltage

100–240 VAC (8.6–4.3 A), autoranging, 50/60 Hz

Summary of Contents for SCv300





















Search results

Summary of Contents for SCv300

Reviews:

Related manuals for SCv300

Brands by name

Popular brands

Dell SCv300, Owner'S Manual

Search results

Summary of Contents for SCv300

Reviews:

Related manuals for SCv300

Brands by name

Popular brands