Figure 7. Extend the Rack Rails
d. Slide the rack rails over the expansion enclosure chassis rails.
e. Remove the four handles from the sides of the expansion enclosure chassis.
f. Slide the expansion enclosure chassis into the rack.
Figure 8. Mount the Expansion Enclosure into the Rack
8.
If the drives, fans, PSUs, and EMMs were removed from the expansion enclosure chassis, reinstall these components in the
chassis.
9.
Secure the expansion enclosure chassis and top cover.
a. Install the six clip nuts (106-569-307) into the rack holes that align with the shoulder screws on the front of the expansion
enclosure chassis.
b. Use the orange enclosure latch handles to push the expansion enclosure chassis completely into the rack.
Make sure that the self-locking latches are pushed in and fully engaged to prevent the expansion enclosure chassis from
sliding out of the rack.
8
