Dell S6100, Configuration Manual

Page: 277 / 1743

All routes with the NO_ADVERTISE (0xFFFFFF02) community attribute must not be
advertised to other BGP peers.
no-export Enter the keywords
no-export
to drop all routes containing the well-known community
attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute must not be
advertised outside a BGP confederation boundary.
none Enter the keyword
none
to remove the community attribute from routes meeting the
route map criteria.
additive (OPTIONAL) Enter the keyword
additive
to add the communities to already existing
communities.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
• match community — redistribute routes that match the COMMUNITY attribute.
• show ip bgp community — display BGP community groups.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
Syntax set level {backbone | level-1 | level-1-2 | level-2 | stub-area}
Access Control Lists (ACL) 277