Dell S6100, Configuration Manual

Page: 263 / 1743

Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series.
7.8.1.0 Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related Commands
• set as-path — add information to the BGP AS_PATH attribute.
match community
To match routes that have a certain COMMUNITY attribute in their BGP path, configure a filter.
Syntax match community community-list-name [exact]
To delete a community match filter, use the
no match community
command.
Parameters
community-list-
name Enter the name of a configured community list.
exact (OPTIONAL) Enter the keywords
exact
to process only those routes with this
community list name.
Defaults Not configured.
Command Modes ROUTE-MAP
Access Control Lists (ACL) 263