Dell S6100, Configuration Manual

Page: 1578 / 1743

SupportAssist
SupportAssist sends troubleshooting data securely to Dell. SupportAssist in this Dell Networking OS release does not support automated
email notification at the time of hardware fault alert, automatic case creation, automatic part dispatch, or reports. SupportAssist requires
Dell Networking OS 9.9(0.0) and SmartScripts 9.7 or later to be installed on the Dell Networking device. For more information on
SmartScripts, see
Dell Networking Open Automation guide .
NOTE: SupportAssist is enabled by default on the system. To disable SupportAssist, enter the
eula-consent support-
assist reject
command in Global Configuration mode and save the configuration.
Topics:
• eula-consent
• support-assist
• support-assist activate
• support-assist activity
• SupportAssist Commands
• SupportAssist Activity Commands
• SupportAssist Company Commands
• SupportAssist Person Commands
• SupportAssist Server Commands
• show eula-consent
• show running-config
• show support-assist status
eula-consent
Accept or reject the end user license agreement (EULA).
Syntax eula-consent {support-assist} {accept | reject}
Parameters
support-assist Enter the keywords
support-assist
to either accept or reject the EULA for the
specified service.
accept Enter the keyword
accept
to accept the EULA for the specified service.
reject Enter the keyword
reject
to reject the EULA for the specified service.
Defaults None
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide .
53
1578 SupportAssist