Replacing the Chassis Intrusion Switch
To replace the chassis intrusion switch, follow the "
Removing the Chassis Intrusion Switch
" procedures in reverse order.
Resetting the Chassis Intrusion Detector
1.
Enter system setup by pressing <F2> during the computer's POST.
For instructions on using system setup, see the
User's Guide
.
2.
Under the
System Security
tab, reset the
Chassis Intrusion
option by pressing the left- or right-arrow key to select
Reset
. Change the setting to
Enabled
,
Enabled-Silent
, or
Disabled
.
3.
Press <Alt><B> to restart the computer and implement your changes.
Back to Contents Page
NOTE:
The default is
Enabled-Silent
.
NOTE:
If a setup password has been assigned by someone else, contact the network administrator for information on resetting the chassis intrusion
detector.
Summary of Contents for Precision Workstation 340
Page 8: ...Back to Contents Page ...