Installing the Hard Drive
1.
If a 2.5–inch or 3.5–inch hard drive is installed, place the hard drive to the hard-drive caddy until it
snaps to its place.
2.
Flex the hard-drive bracket and then insert the hard drive into the bracket.
3.
Slide the hard-drive bracket into its compartment and close the hard-drive bracket clasp.
4.
Install the front cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Left Cover
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Pull up the cover release latch on the side of the computer.
3.
Lift the cover upward to a 45–degree angle and remove it from the computer.
17
