NOTE: Damaging pins during removal of the processor can cause damage to the processor.
4.
Repeat the above steps to remove the second processor (if available) from the computer.
To verify if your computer has dual processor slots, see the
System Board components
.
Installing the Processor
1.
Place the processor in its socket.
2.
Replace the processor cover.
NOTE: The processor cover is secured by two levers. They have icons that indicate which lever
needs to be opened first and which lever closes first.
3.
Slide the first lever sideways into the retention hook to secure the processor.
4.
Repeat step '3' to slide the second lever into the retention hook.
5.
Install:
a.
heatsink assembly
b.
computer cover
6.
Follow the procedures in
After Working Inside Your Computer
.
System Board Components
The following image displays the system board components .
36
Summary of Contents for Precision Tower 5810
Page 1: ...Dell Precision Tower 5810 Owner s Manual Regulatory Model D01T Regulatory Type D01T006 ...
Page 31: ...6 Lift the metal plate out of the chassis 7 Remove the screws that secure the drive bay 31 ...
Page 42: ...42 ...
Page 67: ...Feature Specification Airborne contaminant level G1 as defined by ISA S71 04 1985 67 ...
