manualshive.com logo in svg

Dell Precision M70, Service Manual

Share
Download
Dell Precision M70 Service Manual Download Page 31

Great user manuals database on 

UserManuals.info

Back to Contents Page

  

 

 Smart Card Reader  

Dell Precision™ M70 Service Manual

 

 

 

 

 

 

Removing the Smart Card Reader 

 

 

1.

Follow the instructions in "

Preparing to Work Inside the Computer

."  

 

 

  

2.

Remove the 

display assembly

.  

 

 

  

3.

Remove the 

keyboard

.  

 

 

  

4.

Remove the 

palm rest

.  

 

 

  

5.

Locate the smart card reader and disconnect the smart-card ZIF connector from the system board.  
 

  

 

 

6.

Remove the single M2 x 3-mm screw in the neck of the smart card reader.  
 

 

  

7.

Lift the smart card reader slightly and slide it out from under the tabs holding it in place.  
 

Back to Contents Page

 

 

 

 

CAUTION: 

Before performing the following procedures, read the safety instructions in your 

Product Information Guide

.

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such 

as the back panel) on the computer.

1  smart card reader 

2  M2 x 3-mm screw 

3  smart-card ZIF connector 

Summary of Contents for Precision M70















































Reviews:

No comments

Brands by name

Popular brands

Load more brands