3
To remove LED board:
a Lift the tab and disconnect the LED-board cable from the system board [1].
b Peel the LED-board cable from the system.
c Remove the single (M2.0x3.0) screw that secures the LED board to the system [2].
d Remove the LED board from the system [3].
Installing the LED board
1
To install the LED board:
a Align the LED board to its original position on the system [1].
b Replace the single (M2.0x3.0) screw to secure the LED board to the system [2].
c Affix the LED-board cable.
d Connect the LED-board cable to the connector in the system board [3].
70
Removing and installing components
Summary of Contents for Precision 7730
Page 1: ...Dell Precision 7730 Service Manual Regulatory Model P34E Regulatory Type P34E001 ...
Page 28: ...d Lift the keyboard lattice away from the system 28 Removing and installing components ...
Page 45: ...Removing and installing components 45 ...
Page 46: ...46 Removing and installing components ...
