Dell PowerVault, Manual, Page: 309 / 396

Parameters
None.
Set Storage Array Unnamed Discovery Session
Description
This command enables the storage array to participate in unnamed discovery sessions.
Syntax
set storageArray unnamedDiscoverySession=(TRUE | FALSE)
Parameter
Parameter Description
unnamedDiscoverySession
This parameter turns on or turns off unnamed
discovery sessions. Set the parameter to
TRUE
to
turn on unnamed discovery sessions. Set the
parameter to
FALSE
to turn off unnamed discovery
sessions.
NOTE: Discovery is the process where initiators determine the targets that are available. Discovery
occurs at power-on/initialization and also if the bus topology changes, for example, if an extra
device is added.
NOTE: An unnamed discovery session is a discovery session that is established without specifying a
target ID in the login request. For unnamed discovery sessions, neither the target ID nor the target
portal group ID are available to the targets.
Set Thin Virtual Disk Attributes
Description
This command defines the properties for a thin virtual disk. You can use the parameters to define
properties for one or more thin virtual disks.
Syntax
set (virtualDisk [" virtualDiskName "] |
virtualDisks [" virtualDiskName1 " ... " virtualDiskNameN "] | virtualDisk < wwID >)
[newCapacity=capacityValue | repositoryMaxCapacity=capacityValue|
repositoryExpansionPolicy=(automatic|manual)|
warningThresholdPercent=integer-literal | addRepositoryCapacity=capacity-spec]
309