Figure 114. Installing the NVLink sponge
Next steps
1.
Install the rear mounting front PERC module
.
2. Follow the procedure listed in
After working inside your system
.
Removing the NVLink bridges
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3.
Remove the rear mounting front PERC module
.
NOTE:
Observe the cable routing before disconnecting the cables.
4.
.
5.
.
6. Number of NVLink bridges vary as per the GPU.
7. Slot priority for GPU card installation without NVLink bridges: slot 31, slot 33, slot 34, and slot 32.
8. Slot priority for GPU card installation with NVLink bridges: slot 33, slot 34, slot 31, and slot 32.
NOTE:
For more information about supported GPU cards and their slot priority, see
expansion card installation guidelines
.
Steps
1. Holding the edges, pull the NVLink bridges out of the GPU cards.
114
Installing and removing system components