Figure 37. Removing the backplane
Next steps
.
Installing the drive backplane
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3.
.
4.
5. Remove all the drives.
NOTE:
To avoid damaging the backplane, ensure to move the control panel cables from the cable routing clips before
removing the backplane.
NOTE:
Route the cable properly when you replace it to prevent the cable from being pinched or crimped.
Steps
1. Use the hooks on the system as guides to align the slots on the backplane with the guides on the system.
2. Insert the backplane into the guides and lower the backplane until the blue release tabs click into place.
46
Installing and removing system components
Summary of Contents for PowerEdge R450
Page 15: ...Figure 11 Memory information Dell EMC PowerEdge R450 system overview 15 ...
Page 16: ...Figure 12 Service information electrical overview 16 Dell EMC PowerEdge R450 system overview ...
Page 17: ...Figure 13 Service information mechanical overview Dell EMC PowerEdge R450 system overview 17 ...
