Figure 33. Installing a cabled hard drive carrier
1.
power/data cable
2. hard drive
3. release tab
4. hard drive carrier
5. screw (4)
Next steps
1.
Enter System Setup and ensure that the controller of the hard drive is enabled.
2.
Exit System Setup and reboot the system.
3.
Install any software required for the hard drive operation as described in the documentation for the
hard drive.
4.
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
After working inside your system
Removing a hot swappable hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
If installed, remove the front bezel.
104
