Dell PowerEdge M710 Technical Guide
28
9
BIOS
9.1
Overview
The PowerEdge™ M710 BIOS is based on the Dell BIOS core, and supports the following features:
•
Intel Xeon processor 5500 and 5600 series 2S support
•
Simultaneous Multi-Threading (SMT) support
•
Processor Turbo Mode support
•
PCI 2.3 compliant
•
Plug n’ Play 1.0a compliant
•
MP (Multiprocessor) 1.4 compliant
•
Boot from hard drive, optical drive, iSCSI drive, USB key, and SD card
•
ACPI support
•
Direct Media Interface (DMI) support
•
PXE, ISCSI, and WOL support for on-board NIC
•
Memory mirroring
•
SETUP access through F2 key at end of POST
•
USB 2.0 (USB boot code is 1.1 compliant)
•
F1/F2 error logging in CMOS
•
Virtual KVM, CD, and floppy support
•
Unified Server Configurator (UEFI 2.1) support
•
Power management support including DBS, Power Inventory and multiple Power Profiles
The M710 BIOS does not support the following:
•
Embedded Diagnostics (embedded in the Lifecycle Controller)
•
BIOS language localization
•
BIOS recovery after bad flash (but can be recovered from iDRAC6 Express)
9.2
Supported ACPI States
The M710 supports the standard Advanced Configuration and Power Interface (ACPI) states. To learn
more see
www.acpi.info
.