75
Installing the optional rSPI card
Prerequisites
CAUTION: Many repairs may only be done by a
certified
service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
NOTE: You must remove the rSPI card to replace a faulty rSPI card or service other components inside the system.
CAUTION: Toprevent damage to the rSPI card, you must hold the card only by its edges.
1.
Follow the safety guidelines listed in safety instructions section.
2.
Keep the Phillips #2 screwdriver ready.
3.
Remove the rSPI card.
Steps
1.
Align the two screw holes on the rSPI card with the standoffs on the system board.
2.
Install the two screws to secure the rSPI card to the system board.
Figure 28. Installing the optional rSPI card
1. screw (2)
2. rSPI card
3. standoff (2)
4. connector
Next step
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the optional rSPI card
After working inside your system
SD vFlash card
A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It provides persistent on-demand
localstorageandacustomdeploymentenvironmentthatallowsautomationofserverconfiguration, scripts, andimaging. Itemulates
USB devices. For more information, see the
Integrated Dell Remote Access Controller User’s Guide
at
Dell.com/idracmanuals
.
