manualshive.com logo in svg

Dell PowerEdge FC630, Owner'S Manual, Page: 20 / 143

Share
Download
Dell PowerEdge FC630 Owner'S Manual Download Page 20

Driver specification

Hard drives

ThePowerEdge FC630 system supports:

• Up to two 2.5-inch, hot-swappable SAS, SATA hard drives or SAS or SATA or PCIe SSDs

SSDs

The PowerEdge FC630 system supports:

• Up to eight 1.8-inch, hot-swappable SATA SSDs

Optical drive

The PowerEdge FC630 system supports external optional USB DVD and one optional SATA DVD-ROM 
drive or DVD+/-RW drive.

Flash drive

The PowerEdge FC630 system supports internal optional USB, internal optional SD card and optional 
vFlash card (with integrated iDRAC8 Enterprise).

Ports and connectors specifications 

USB ports

The PowerEdge FC630 system supports:

• USB 2.0-compliant ports on the front panel
• internal USB 3.0-compliant port

The following table provides more information about the USB specifications:

Table 9. USB specifications

System

Front panel

Internal

PowerEdge FC630

One 4-pin, USB 2.0-compliant 

and one 4-pin, USB 3.0-

compliant

• Two internal SD cards 

dedicated for the hypervisor

• One SD card dedicated for 

future vFlash support

Internal Dual SD Module 

The PowerEdge FC630 system supports two SD card slots and a USB interface dedicated for the 
embedded hypervisor. This card offers the following features:

• Dual card operation — maintains a mirrored configuration by using SD cards in both slots and 

provides redundancy.

• Single card operation — single card operation is supported, but without redundancy.

20

Summary of Contents for PowerEdge FC630
















































































































































Reviews:

No comments