manualshive.com logo in svg

Dell POWEREDGE E11S, Owner'S Manual, Page: 37 / 130

Share
Download
Dell POWEREDGE E11S Owner'S Manual Download Page 37

Using the System Setup Program and Boot Manager

37

Boot Settings Screen

Boot Mode: BIOS

Boot Mode: UEFI

System Utilities Screen

Option

Description

Set Boot Order

Sets the order of the boot option list.

Set Legacy Floppy Drive Order

Sets the floppy drive boot priority. 

Set Legacy Hard Disk Drive Order

Sets the hard drive boot priority. 

Set Legacy CD-ROM Drive Order

Sets the CD-ROM boot priority. 

Set Legacy NET Drive Order

Sets the network device boot priority. 

Set Legacy BEV Drive Order

Sets the Bootstrap Entry Vector (BEV) boot 

priority. 

NOTE: 

Only the first device under Legacy Drive is displayed in the Set Boot Order option.

Option

Description

Add Boot Option

Adds a new boot option.

Delete Boot Option

Deletes an existing boot option.

Enable/Disable Boot Option

Disables and enables a boot option in the boot 

option list.

Boot From File

Sets a one-time boot option not included in the 

boot option list.

Set Boot Order

Sets the order of the boot option list.

Option

Description

System Setup

Accesses the System Setup program without 

rebooting.

System Services

Restarts the system and accesses the Dell 

USC, which allows you to run utilities such 

as system diagnostics.

Reset System

Restarts the system.

Summary of Contents for POWEREDGE E11S



































































































































Reviews:

No comments