Dell PowerEdge Cluster FE100 User Manual Download Page 13 | Manualshive

Page: 13 / 98

background image

support.dell.com

Getting Started

1-1

C H A P T E R 1

Getting Started

This chapter provides an overview of the following information for the
Dell

™

PowerEdge

™

Cluster FE100/FL100 Datacenter Server configuration:

•

Microsoft

®

Windows

®

2000 Datacenter Server operating system

•

Configuration and operation

•

Cluster identification

•

Failover options

•

Minimum system requirements

•

Support configuration requirements

Overview of Microsoft Windows 2000

Datacenter Server

Windows 2000 Datacenter Server is geared specifically for organizations implement-
ing and managing enterprise applications that require high availability and high
performance. Typical application usages include large data warehouses, server con-
solidation, online transaction processing (OLTP), and modeling/simulation.

Windows 2000 Datacenter Server provides all of the features included with Microsoft
Windows 2000 Advanced Server, along with the following additional features:

•

Two-to-four-node clustering—provides high availability of applications through
failover to another node in the cluster

•

Support for up to 32-way symmetrical multiprocessing (SMP)—the operating sys-
tem distributes the processing workload with up to 32 central processing units
(CPUs)

•

Support for up to 32 gigabyte (GB) random access memory (RAM) on the physi-
cal address extension (PAE)-capable PowerEdge 8450 system—improves
multiple application performance

•

Winsock Direct—optimizes Internet protocol (IP) performance

•

Process Control management tool—improves server resource management

«
...
11
12
13
14
15
...
»

Summary of Contents for PowerEdge Cluster FE100



































































































Reviews:

No comments

Related manuals for PowerEdge Cluster FE100

Redbooks ServeRAID-MR10k

Brand: IBM Pages: 48

MCX-2000 - MusicCAST Digital Audio Server

Brand: Yamaha Pages: 25

301160U - 1TB Ethernet Disk RAID Network Attached...

Brand: LaCie Pages: 5

Brand: Synology Pages: 15

Brand: Gigabyte Pages: 2

Brand: Avaya Pages: 84

Brand: Advantech Pages: 43

Brand: BRONKHORST Pages: 19

Brand: Sony Pages: 8

BSV-M1 - StorStation NAS Server

Brand: Sony Pages: 58

Brand: Axis Pages: 160

ProxyServer MTPSR1-100

Brand: Multitech Pages: 16

MultiArrayIII MA3a

Brand: Multitech Pages: 40

Brand: Multitech Pages: 82

Brand: GIGA-BYTE TECHNOLOGY Pages: 96

Brand: GIGA-BYTE TECHNOLOGY Pages: 99

Brand: GIGA-BYTE TECHNOLOGY Pages: 142

Brand: Raidon Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands