1-2
Rack Installation Guide
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
F i g u r e 1 - 1 . R a c k K i t C o n t e n t s
Rack Requirements
The rack kit is designed for use in a Dell rack with an extended-depth back door. If you
have a Dell rack cabinet with a white finish, check that the back door does not contain
flush-mounted glass. If it does, you will need to order a new rack door from Dell before
installing your new system in the rack.
NOTICE:
This rack kit is intended to be installed in a Dell rack by trained service technicians.
If you install the kit in any other rack, be sure that the rack meets the specifications of American
National Standards Institute (ANSI)/Electronic Industries Association (EIA) standard
ANSI/EIA-310-D-92, International Electrotechnical Commission (IEC) 297, and Deutsche
Industrie Norm (DIN) 41494. One rack kit is required for each system that is installed in a rack.
slide assemblies with
mounting brackets (2)
cable-management arm
cable tray
6-32 x 0.25-inch
hex-head taptite
screws (3)
rack template
6-32 x 0.25-inch
flat-head Phillips
screws (2)
