manualshive.com logo in svg

Dell PowerEdge 2970, Hardware Owner'S Manual, Page: 165 / 188

Share
Download
Dell PowerEdge 2970 Hardware Owner'S Manual Download Page 165

Getting Help

165

Korea (Seoul)

International Access Code: 

001

Country Code: 

82

City Code: 

2

Online Support

support.ap.dell.com

Technical Support, Customer Service

toll-free: 080-200-3800

Technical Support – Dimension, PDA, 
Electronics, and Accessories

toll-free: 080-200-3801

Sales

toll-free: 080-200-3600

Fax

2194-6202

Switchboard

2194-6000

Latin America

Customer Technical Support (Austin, 
Texas, U.S.A.)

512 728-4093

Customer Service (Austin, Texas, U.S.A.)

512 728-3619

Fax (Technical Support and Customer 
Service) (Austin, Texas, U.S.A.)

512 728-3883

Sales (Austin, Texas, U.S.A.)

512 728-4397

Sales Fax (Austin, Texas, U.S.A.)

512 728-4600

or 512 728-3772

Luxembourg

International Access Code: 

00

Country Code: 

352

Online Support

support.euro.dell.com

Support

342 08 08 075

Home/Small Business Sales

+32 (0)2 713 15 96

Corporate Sales

26 25 77 81

Customer Service

+32 (0)2 481 91 19

Fax

26 25 77 82

Malaysia (Penang)

International Access Code: 

00

Country Code: 

60

City Code: 

4

Online Support

support.ap.dell.com

Technical Support – Dell Precision, 
OptiPlex, and Latitude

toll-free: 1 800 880 193

Technical Support – Dimension, Inspiron, 
and Electronics and Accessories

toll-free: 1 800 881 306

Technical Support – PowerApp, PowerEdge, 
PowerConnect, and PowerVault

toll-free: 1800 881 386

Customer Service

toll-free:

1800 881 306 (option 6)

Transaction Sales

toll-free: 1 800 888 202

Corporate Sales

toll-free: 1 800 888 213

Country (City)
International Access Code 
Country Code
City Code

Service Type

Area Codes,

Local Numbers, and

Toll-Free Numbers

Web and E-mail Address

Summary of Contents for PowerEdge 2970





























































































































































































Reviews:

No comments