14
Getting Started Guide
•
Establishes the initial privileged user account with a valid password. The
wizard configures one privileged user account during the setup.
•
Enables CLI login and HTTP access to use the local authentication setting
only.
•
Sets up the IP address for the OOB interface.
•
Sets up the SNMP community string to be used by the SNMP manager at
a given IP address. You may choose to skip this step if SNMP management
is not used for this switch.
Example Session
This section describes an Easy Setup Wizard session. The following values are
used by the example session:
•
SNMP is not enabled.
•
The default user name,
root
, is accepted and a password of
admin123
is
entered. The Wizard does not display the password as it is entered.
•
The OOB management interface uses
192.168.2.1
for IP address
assignment.
NOTE:
In the example below, the possible user options or default values are
enclosed in [ ]. If you press <Enter> with no options defined, the default value is
accepted. Help text is in parentheses.
The following example contains the sequence of prompts and responses
associated with running an example
Dell Easy Setup Wizard
session, using
the input values listed above.
After the switch completes the POST and is booted, the following text is
displayed:
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly
as possible. You can skip the setup wizard, and enter
CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard
within 60 seconds, otherwise the system will continue
Summary of Contents for PowerConnect M8428-k
