Dell PowerConnect J-SRX210, Hardware Manual

Page: 130 / 182

This topic includes the following sections:
•
Using the Reset Config Button on the J-SRX210 Services Gateway on page 114
•
Changing the Reset Config Button Behavior on the J-SRX210 Services
Gateway on page 114
Using the Reset Config Button on the J-SRX210 Services Gateway
If a configuration fails or denies management access to the services gateway, you can
use the Reset Config button to restore the device to the factory default configuration or
a rescue configuration. For example, if someone inadvertently commits a configuration
that denies management access to a services gateway, you can delete the invalid
configuration and replace it with a rescue configuration by pressing the Reset Config
button.
NOTE: The Reset Config button is recessed to prevent it from being pressed accidentally.
The rescue configuration is a previously committed, valid configuration. You must have
previously set the rescue configuration through the J-Web interface or the CLI.
To press the Reset Config button, insert a small probe (such as a straightened paper
clip) into the pinhole on the front panel.
• By default, pressing and quickly releasing the Reset Config button loads and commits
the rescue configuration through the J-Web interface or the CLI. The Status LED glows
amber during this time. For details, see the
JUNOS Software CLI User Guide .
• By default, pressing and holding the Reset Config button for 15 seconds or more—until
the Status LED glows amber—deletes all configurations on the device, including the
backup configurations and rescue configuration, and loads and commits the factory
configuration. For details about factory default settings, see the
JUNOS Software
Administration Guide .
Related Topics Changing the Reset Config Button Behavior on the J-SRX210 Services Gateway on
page 114
•
•
Monitoring the J-SRX210 Services Gateway Chassis Using the CLI on page 107
•
Monitoring the J-SRX210 Services Gateway Components Using LEDs on page 109
•
Monitoring the J-SRX210 Services Gateway Using Chassis Alarm Conditions on page 111
•
Monitoring the J-SRX210 Services Gateway Power System on page 113
•
Dell Support on page 115
Changing the Reset Config Button Behavior on the J-SRX210 Services Gateway
You can change the default operation of the Reset Config button by limiting how the
button resets the services gateway:
114
PowerConnect J-SRX210 Services Gateway Hardware Guide