CLI Commands
The following table summarizes the equivalent CLI commands for items in the
Multicast Support/IGMP Setting
page.
Example
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 20
Console(config)#ip igmp snooping query-time-out 300
Console(config)#ip igmp snooping version 1
Command
Usage
ip igmp snooping
Enables IGMP snooping on the switch
ip igmp snooping querier
Enables the switch as an IGMP snooping querier
ip igmp snooping query-count
count
Configures the query count
ip igmp snooping query-interval
seconds
Configures the snooping query interval
ip igmp snooping query-max-response time
seconds
Configures the snooping report delay
ip igmp snooping query-time-out
seconds
Configures the snooping query-timeout
ip igmp snooping version {1 | 2}
Configures the IGMP snooping version
show ip igmp snooping
Shows the IGMP snooping configuration
Summary of Contents for PowerConnect 5212
Page 5: ......
Page 83: ...Console config clear counters ethernet 1 17 Back to Contents Page ...
Page 90: ...Back to Contents Page ...
