h. Fingerprint reader FFC
i.
Power button FFC from the system board
4. Fold back the right hinge and install the two (M2.5x5) screws to secure it to the palmrest.
Next steps
1. Install the
.
2. Install the
.
3. Install the
.
4. Install the
5. Install the
6. Install the
7. Install the
.
8. Install the
.
9. Install the
.
after working inside your computer
.
Power-adapter port
Removing the power adapter port
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Disconnect the
.
5. Remove the
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
NOTE:
The system board can be removed along with the heat sink.
72
Disassembly and reassembly
Summary of Contents for P90F
