Dell P80G, Service Manual

Page: 93 / 131

4. Connect the keyboard, keyboard backlit cables on to the connector on the palmrest.
Next steps
1. Install the system board .
NOTE: System board can be removed with heatsink attached.
2. Install the memory module
3. Install the inner frame .
4. Install the WWAN card .
5. Install the WLAN card .
6. Install the HDD .
7. Install the solid state drive .
8. Install the battery .
9. Install the base cover .
10. Follow the procedure in After working inside your computer .
Keyboard bracket
Removing the keyboard bracket
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
4. Remove the solid-state drive .
5. Remove the HDD .
6. Remove the WLAN card .
7. Remove the WWAN card .
8. Remove the inner frame .
9. Remove the memory module .
10. Remove the system board
NOTE: System board can be removed with heatsink attached.
.
11. Remove the keyboard .
About this task
The figure indicates the location of the keyboard bracket and provides a visual representation of the removal procedure.
Disassembly and reassembly 93