Changing the Power Saver timeout
The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left
idle. The Power Saver feature optimizes energy efficiency by reducing the printer power consumption (as much as
28 percent on some printer models) compared to the default printer settings. To save the most energy, select the
lowest Power Saver timeout.
1
From the home screen, navigate to
Power Saver
:
>
Device Setup
>
Power Saver
2
Select a Power Saver timeout, and then touch
Accept
.
Saving paper and energy with Eco-Mode
The Eco-Mode feature significantly cuts paper usage, reduces paper waste, optimizes energy efficiency, and saves
money.
1
From the home screen, touch
.
2
Touch the Eco-Mode setting or settings you want to activate, and then touch
Accept
.
•
Power Saver after 10 Minutes
•
Auto Screen Dim
•
2-Sided Printing
Note:
If you select 2-Sided Printing, then the printer prints on both sides of the paper (duplex) for copy and
fax jobs, and for printing in Windows.
Resetting to factory settings
Resetting to factory default settings will delete all the printer settings you have previously selected.
1
From the home screen, touch
, and then touch
Use Factory Defaults
.
2
Touch
Yes
.
3
When prompted to set the initial settings of your printer, make your selections using the touch screen.
Using the printer control panel buttons and menus
19
