26
| Setting
up
the
monitor
Using the (MHL) mobile-high definition link
NOTE:
This monitor is MHL certified.
NOTE:
To use the MHL function, use only MHL-certified cable and source
devices that support MHL output.
NOTE:
Some MHL source devices may take more than a few seconds or longer
to output an image, depending on MHL source devices.
NOTE:
When the connected MHL source device enters Standby mode, the
monitor will display black screen or show the massage below, depending on
MHL source device’s output.
Dell
P4317Q
Entering Power Save Mode.
To enable MHL connection, please perform the below steps:Setting Up the Monitor
1.
Plug the power cable of your monitor into an AC outlet.
2.
Connect the (micro) USB port on your MHL source device to HDMI/MHL 1 or
HDMI/MHL 2 port on the monitor with a MHL-certified cable (See
Bottom view
for details.)
3.
Turn on the monitor and the MHL source device.
4.
Select input source on monitor to HDMI/MHL 1 or HDMI/MHL 2 by using OSD
Menu (See
Using the on-screen display (OSD) menu
for details.).
5.
If it does not display an image, see
Mobile high-definition link (MHL) specific
problems
.
Organizing cables
After you connect all necessary cables to your monitor and computer, organize all
cables as shown above.
NOTE:
After the cables are connected, they will have to be disconnected again
to route them through the hole.