Dell P3221D User Manual Download Page 38

Page: 38 / 65

| Operating the monitor

Joystick Description

•

When the OSD menu is on, press the button to confirm the selection
or save the settings.

•

When the OSD menu is off, press the button to launch the OSD main
menu. See

Accessing the menu system

•

For 2-way (right and left) directional navigation.

•

Move right to enter the submenu.

•

Move left to exit from the submenu.

•

Increases (right) or decreases (left) the parameters of selected menu
item.

•

For 2-way (up and down) directional navigation.

•

Toggles between the menu items.

•

Increases (up) or decreases (down) the parameters of selected menu
item.

Use the joystick control on the rear of the monitor to adjust the display settings. As
you use the button to adjust the settings, an OSD shows the numeric values of each
feature as they change.

Input Source

Options

Description

Menu

Use this

Menu

button to launch the on-screen

display (OSD) and select the OSD menu.
See

Accessing the Menu System

Shortcut key:

Input Source

Use this button to choose from a list of Input
Source.

Summary of Contents for P3221D


































































Search results

Summary of Contents for P3221D

Reviews:

Related manuals for P3221D

Brands by name

Popular brands

Dell P3221D, User Manual

Search results

Summary of Contents for P3221D

Reviews:

Related manuals for P3221D

Brands by name

Popular brands