16
| About your monitor
The OSD operates only in the normal operation mode. If you press any button in the
active-off mode, the following message is displayed:
No USB-C signal from your device.
Press any key on the keyboard to wake it up.
If there is no display, press the monitor joystick to select
correct input sources.
*Zero power consumption in OFF mode can only be achieved by disconnecting
the AC mains cable from the monitor.
**Maximum power consumption with maximum luminance, and USB active.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals
you ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings
which can be restored by “Factory Reset” function in the OSD menu.
Changing the factory default settings or enabling other features may
increase power consumption that could exceed the ENERGY STAR
specified limit.
NOTE:
P
on
:
Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC:
Total energy consumption in kWh as defined in Energy Star 8.0 version.
