│
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed on your
computer, the monitor can automatically reduce its power consumption when not
in use. This is referred to as
Standby Mode
*. If the computer detects input from
the keyboard, mouse, or other input devices, the monitor automatically resumes to
function. The following table shows the power consumption and signaling of this
automatic power saving feature.
VESA Modes Horizontal
sync
Vertical
sync
Video
Power
indicator
Power
consumption
Normal
operation
Active
Active
Active
White
138 W (maximum)*
35.6 W (typical)
Active-off
mode
Inactive
Inactive
Blank
Glowing
white
Less than 0.5 W
Switch-off
-
-
-
Off
Less than 0.3 W
Power Consumption P
ON
22 W
Total Energy Consumption (TEC) 66.7 kWh
*Maximum power consumption with max luminance, and USB active.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals you
ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed
or implied.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings
which can be restored by “Factory Reset” function in the OSD menu.
Changing the factory default settings or enabling other features may
increase power consumption that could exceed the ENERGY STAR
specified limit.
NOTE:
P
ON
: Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
