manualshive.com logo in svg

Dell P2422HA, User Manual, Page: 23 / 66

Share
Download
Dell P2422HA User Manual Download Page 23

 About your monitor   

│

  23

USB 3.2 Gen1 (5 Gbps) downstream connector

Pin 

number

9-pin side of the 

connector

1

VCC

2

D-

3

D+

4

GND

5

SSRX-

6

SSRX+

7

GND

8

SSTX-

9

SSTX+

 

NOTE: SuperSpeed USB 5 Gbps (USB 3.2 Gen1) functionality requires 
a SuperSpeed USB 5 Gbps (USB 3.2 Gen1)-capable computer.

 

NOTE: The USB ports on the monitor work only when the monitor is 
turned On or in power save mode. If you turn Off the monitor and then 
turn it On, the attached peripherals may take a few seconds to resume 
normal functionality.

Plug and play capability

You can connect the monitor to any Plug-and-Play compatible computer. 
The monitor automatically provides the computer with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the 
computer can configure itself and optimize the monitor settings. Most monitor 
installations are automatic; you can select different settings, if required. For more 
information about changing the monitor settings, see 

Operating your monitor

.

Summary of Contents for P2422HA



































































Reviews:

No comments