5. Disassembly and Assembly Procedures
5.2 Assembly Procedures:
Take a mylar to insert the hooks of the bracket to
cover the power board.
S4
Panel preparation: Examine the panel surface
according to inspection criteria. Turn over the panel
to place the screen faced down for later assembling.
S6
Turn over a power board and put the power board
into the bracket chassis, locate the panel power
cable into the hook of the bracket chassis.
Place a bracket chassis base on a protective
cushion.
S2
S1
Take a interface board, connect a LVDS cable to the
connector of the interface board, then connect the
cable of the power board to the connector of the
interface board. Turn over the interface board and
locate it into the bracket. Use a Philips-head
screwdriver to tighten six screws for locking the
power board and interface board.
(No.1~5 screw size=M3x7.5, Torque=6
±0.5
kgfxcm;
No.6 screw size=M4x8, Torque=6
±0.5
kgfxcm)
3
4
S3
6
2
5
Put the bracket chassis module on the back of LCD
module, then lift up the panel with bracket and take
1pcs front bezel to assemble with the panel module.
1
Use a Hex-head screwdriver to tighten two Hex Nuts
for locking the D-Sub connector.
(No.1~2 screw size=M3x8, Torque=6
±0.5
kgfxcm)
(No.3~4 screw size=M3x8, Torque=6~7kgfxcm;
Use a Philips-head screwdriver to tighten two screws
for locking the AC power outlet.
2
1
4
3
S7
S5
