Dell P111G Service Manual Download Page 50

Page: 50 / 139

Next steps

1. Replace the

WWAN card

2. Reconnect the

battery

cable.

3. Replace the

base cover

4. Replace the

SIM card

5. Replace the

SD memory card

6. Follow the procedure in

after working inside your computer

Solid-state drive/Intel Optane memory module

Removing the M.2 2280 Solid-state drive or Intel Optane memory—Optional

Prerequisites

NOTE:

Disable the Intel Optane memory before removing the Intel Optane memory module from your computer. For more

information about disabling the Intel Optane memory, see

disabling Intel Optane memory

1. Follow the procedure in

before working inside your computer

2. Remove the

SD memory card

3. Remove the

base cover

4. Disconnect the

battery

cable.

Steps

1. Remove the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [1].
2. Turn the thermal plate over [2].
3. Slide and remove the thermal plate from the solid-state drive/Intel Optane card slot [3].

Removing and installing components

Summary of Contents for P111G












































































































































Search results

Summary of Contents for P111G

Reviews:

Dell P111G, Service Manual, Page: 50 / 139

Search results

Summary of Contents for P111G

Reviews: