Dell P111G Service Manual Download Page 119

Page: 119 / 139

Table 7. System Configuration (continued)

Option

Description

This option is enabled by default.

USB Configuration

Allows you to enable or disable the internal/integrated USB
configuration.

The options are:

●

Enable USB Boot Support

●

Enable External USB Ports

All the options are set by default.

NOTE:

USB keyboard and mouse always work in the BIOS

setup irrespective of these settings.

SATA Operation

Allows you to configure the operating mode of the integrated
SATA hard drive controller.

Click one of the following options:

●

Disabled

●

AHCI

●

RAID

—Default

NOTE:

SATA is configured to support RAID mode.

Drives

Allows you to enable or disable various drives on board.

The options are:

●

SATA-0

●

M.2 PCIe SSD-0/SATA-2

All the options are set by default.

Miscellaneous devices

Allows you to enable or disable various on board devices.

●

Enable Camera

—Default

●

Enable Hard Drive Free Fall Protection

—Default

●

Enable Secure Digital (SD) Card

—Default

●

Secure Digital Card (SD) Read-Only Mode

●

Secure Digital (SD) Card Boot

Enable USB PowerShare

Allows you to On or Off external devices to be powered or
charged using the stored system battery.

Keyboard Illumination

This field lets you choose the operating mode of the keyboard
illumination feature. The keyboard brightness level can be set
from 0% to 100%.

The options are:

●

Disabled

●

Dim

●

Bright

—Default

Keyboard Backlight Tmeout on AC

Allows you to define the timeout value for the keyboard
backlight when an AC adapter is plugged in the system. The
Keyboard Backlight timeout value is only in effect when the
backlight is enabled.

●

5 seconds

●

10 seconds

—Default

●

15 seconds

●

30 seconds

System setup

119

Summary of Contents for P111G












































































































































Search results

Summary of Contents for P111G

Reviews:

Related manuals for P111G

Brands by name

Popular brands

Dell P111G, Service Manual

Search results

Summary of Contents for P111G

Reviews:

Related manuals for P111G

Brands by name

Popular brands