Identifier
GUID-F361D412-AF33-44BE-A275-37E871F705FC
Status
Released
System Setup options
NOTE:
Depending on the computer and its installed devices, the items listed in this section may or may not appear.
Table 21. General
Option
Description
System Information
Displays the following information:
•
System Information: Displays
BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership
Date, Manufacture Date,
and the
Express Service Code
.
•
Memory Information: Displays
Memory Installed, Memory Available, Memory Speed, Memory
Channel Mode, Memory Technology, DIMM 1 Size
, and
DIMM 2 Size
,
DIMM 3 Size
, and
DIMM
4 Size
.
•
PCI Information: Displays SLOT1, SLOT2, SLOT3, SLOT4, and SLOT5_M.2
•
Processor Information: Displays
Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable,
and
64-Bit Technology.
•
Device Information: Displays
SATA-0, SATA-1, SATA-2, SATA-3, SATA-4, M.2 PCIe SSD-0,
LOM MAC Address, Video Controller, and Audio Controller.
.
Boot Sequence
Allows you to specify the order in which the computer attempts to find an operating system from the
devices specified in this list.
•
Legacy
•
UEFI (selected by default)
Advanced Boot Options
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default,
this option is selected.
Date/Time
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.
Table 22. System Configuration
Option
Description
Integrated NIC
Allows you to control the on-board LAN controller. The option ‘Enable UEFI Network Stack’ is not
selected by default. The options are:
•
Disabled
•
Enabled
•
Enabled w/PXE (default)
NOTE:
Depending on the computer and its installed devices, the items listed in this section
may or may not appear.
SATA Operation
Allows you to configure the operating mode of the integrated hard drive controller.
•
Disabled = The SATA controllers are hidden
•
RAID ON = SATA is configured to support RAID mode (selected by default)
•
AHCI= SATA is configured for AHCI mode
Serial Port
Allows you to determine how the built-in serial port to operate. The options are:
•
Disabled
System setup
23
