Dell OptiPlex XE2, Owner'S Manual

Page: 41 / 61

Option Description
• Enable Intel Virtualization Technology - This option is enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel
®
Virtualization technology for direct I/O.
• Enable Intel Virtualization Technology for Direct I/O - This option is enabled by
default.
Trusted Execution This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
technology. The TPM virtualization technology, and Virtualization technology for
direct I/O must be enabled to use this feature.
• Trusted Execution - This option is disabled by default.
Table 10. Maintenance
Option Description
Service Tag Displays the service tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option
is not set by default.
SERR Messages Controls the SERR message mechanism. This option is not set by default. Some
graphics cards require that the SERR message mechanism be disabled.
Watchdog Timer This option allows you to enable Watchdog Timer Support.
• Enable Watchdog Timer Support - This option is disabled by default.
Table 11. Cloud Desktop
Option Description
Server Lookup Method Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the
Integrated NIC
control in the
System
Configuration
group is set to
Enabled with ImageServer
.
Server IP Address Specifies the primary static IP address of the ImageServer with which the client
software communicates. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the
Integrated NIC
control in the
System
Configuration
group is set to
Enabled with ImageServer
and when
Lookup
Method is set to Static IP .
Server Port Specifies the primary IP port of the ImageServer, which is used by the client to
communicate. The default IP port is 06910.
NOTE: This field is only relevant when the Integrated NIC control in the System
Configuration
group is set to
Enabled with ImageServer
.
Client Address Method Specifies how the client obtains the IP address.
41