Dell OptiPlex 790 Service Manual Download Page 89

Page: 89 / 103

Read fault

Description The operating system cannot read from the floppy or hard drive, the

computer could not find a particular sector on the disk, or the requested
sector is defective.

Requested sector not found

Description The operating system cannot read from the floppy or hard drive, the

computer could not find a particular sector on the disk, or the requested
sector is defective.

Reset failed

Description

The disk re-set operation failed.

Sector not found

Description The operating system cannot locate a sector on the floppy or hard drive.

Seek error

Description The operating system cannot find a specific track on the floppy disk or

hard drive.

Shutdown failure

Description

A chip on the system board might be malfunctioning.

Time-of-day clock stopped

Description

The battery might be dead.

Summary of Contents for OptiPlex 790








































































































Search results

Summary of Contents for OptiPlex 790

Reviews:

Related manuals for OptiPlex 790

Brands by name

Popular brands

Dell OptiPlex 790, Service Manual

Search results

Summary of Contents for OptiPlex 790

Reviews:

Related manuals for OptiPlex 790

Brands by name

Popular brands