manualshive.com logo in svg

Dell OptiPlex 790, Service Manual, Page: 76 / 103

Share
Download
Dell OptiPlex 790 Service Manual Download Page 76

Problem Description

A possible system board failure has occurred.

Troubleshooting Steps Remove all peripheral cards from the PCI and PCI-E slots and 

re-start the computer. If the computer boots, add the 
peripheral cards back one by one until you find the bad one.

LED

Power Button

Problem Description

Power connector not installed properly.

Troubleshooting Steps Re-seat the 2x2 power connector from the power supply unit.

LED

Power Button

Problem Description

Possible peripheral card or system board failure has occurred.

Troubleshooting Steps Remove all peripheral cards from the PCI and PCI-E slots and 

re-start the computer. If the computer boots, add the 
peripheral cards back one by one until you find the bad one.

LED

Power Button

Problem Description

A possible system board failure has occurred.

Troubleshooting Steps

– Disconnect all internal and external peripherals, and 

re-start the computer. If the computer boots, add the 

peripheral cards back one by one until you find the bad 

one.

76

Summary of Contents for OptiPlex 790








































































































Reviews:

No comments