Steps
1. Align the screw holes on the microphone modules with the screw holes on the middle frame.
2. Replace the four screws (M2X2.5) to secure the microphone modules to the middle frame.
3. Route the microphone cable through the routing guides on the display-assembly base and connect the microphone cable to the
system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
4. Install the
5. Install the
6. Install the
7. Install the
8. Follow the procedure in
After working inside your computer
.
Side I/O-board
Removing the side-I/O board
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
.
3. Remove the
(optional).
4. Remove the
.
Removing and installing components
71
