manualshive.com logo in svg

Dell OptiPlex 7040 - Mini Tower, Owner'S Manual, Page: 45 / 53

Share
Download
Dell OptiPlex 7040 - Mini Tower Owner'S Manual Download Page 45

Option

Description

Advanced

Allows you to turn on the Verbose mode for advanced debugging. This 
option is disabled by default.

Table 17. System Logs

Option

Description

BIOS Events

Displays the system event log and allows you to:
• Clear Log
• Mark all Entries

Table 18. Advanced configurations

Option

Description

ASPM

Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only

System Setup overview

System Setup allows you to:

• Change the system configuration information after you add, change, or remove any hardware in your 

computer.

• Set or change a user-selectable option such as the user password.
• Read the current amount of memory or set the type of hard drive installed.

Before you use System Setup, it is recommended that you write down the System Setup screen 
information for future reference.

CAUTION: Unless you are an expert computer user, do not change the settings for this program. 

Certain changes can cause your computer to work incorrectly.

Accessing System Setup

1.

Turn on (or restart) your computer.

2.

After the white Dell logo appears, press F2 or F12 immediately.
The System Setup page is displayed.

NOTE: If you wait too long and the operating system logo appears, wait until you see the 
desktop. Then, shut down or restart your computer and try again.

45

Summary of Contents for OptiPlex 7040 - Mini Tower






















































Reviews:

No comments