manualshive.com logo in svg

Dell OptiPlex 7040 - Mini Tower, Owner'S Manual, Page: 44 / 53

Share
Download
Dell OptiPlex 7040 - Mini Tower Owner'S Manual Download Page 44

Table 15. Maintenance

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This 
option is not set by default.

SERR Messages

Controls the SERR message mechanism. This option is not set by default. 
Some graphics cards require that the SERR message mechanism be 
disabled.

Dell Development 
Configuration

Allows you to turn on/off certain features to control the BIOS. This option is 
disabled by default.

BIOS Downgrade

Allows you to control flashing of the system firmware to the previous 
versions. This option is enabled by default.

NOTE: If this option is not selected, the flashing of the system firmware 
to the previous versions is blocked.

Data Wipe

Allows you to securely erase the data from all the available internal storages, 
such as HDD, SSD, mSATA, and eMMC. This option is disabled by default.

BIOS recovery

Allows you to recover the corrupted BIOS conditions from the recovery files 
on the primary hard drive or an external USB key.

Table 16. Cloud Desktop

Option

Description

Server Lookup Method

Allows you to specify how the cloud desktop software will lookup server 

addresses.
• Static
• DNS (Default)

Server Name

Allows you to specify the name of the server

Server IP Address

Specifies the primary static IP address of the cloud desktop server. The 

default IP address is 255.255.255.255

Server port

Specifies the primary port of the cloud desktop. The default setting is 06910.

Client Address Method

Specifies how the client will obtain the IP address.
• Static IP
• DHCP (Default)

Client IP address

Specifies the static IP address of the client. The default IP address is 

255.255.255.255

Client Subnet Mask

Specifies the subnet mask address of the client. The default IP address is 

255.255.255.255

Client Gateway

Specifies the gateway address of the client. The default IP address is 

255.255.255.255

DNS IP Address

Specifies the DNS IP address of the client. The default IP address is 

255.255.255.255

Domain Name

Specifies the domain name of the client.

44

Summary of Contents for OptiPlex 7040 - Mini Tower






















































Reviews:

No comments