
Removing The Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
a) cover
b) expansion card
3.
Carefully press the release latch away from the battery. The battery pops out from the socket, lift the coin-cell
battery out of the computer.
Installing The Coin-Cell Battery
1.
Place the coin cell battery into its slot on the system board.
2.
Press the coin cell battery downward until the release latch springs back into place and secures it.
3.
Install the expansion card.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing The Hard Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
14
Summary of Contents for OptiPlex 7010
Page 1: ...Dell OptiPlex 9010 7010 Desktop Owner s Manual Regulatory Model D05D Regulatory Type D05D002 ...
Page 52: ...52 ...
Page 58: ...58 ...
Page 66: ...66 ...